Issue 18: Hengyu Guoqiang reducer - solve the problem of early pitting corrosion
Time：2017-10-14 | Source：恒宇国强 | Browse：950651
1、Influence of material and treatment specification;
The correct selection of gear materials, the matching of service load, and the selection and matching of heat treatment hardness are also the factors that affect the early pitting corrosion;
2、The influence of lubricating oil;
The unreasonable lubrication of gear transmission and the unsuitable selection of lubricant are also the causes of early pitting. The ways to prevent the early pitting of reducer gear are as follows
（1） Reasonable lubrication of gear reducer transmission and selection of suitable lubricant;
（2） Improve the installation accuracy of reducer gear and ensure the contact accuracy of gear;
For the central drive reducer, if it is not well investigated during assembly and installation, there may be unsynchronization of the left and right transmission, and the load sharing effect is poor. In this case, one side of the transmission gear may not bear the load, while the other side of the transmission gear is overloaded (up to 2 times of the design load), which is easy to cause progressive early pitting on the tooth surface. Want to know more welcome to Shanghai Ruichen reducer consultation;
Pre：NO
Next：NO
<< Return >>
