Issue 25: can the life of Hengyu Guoqiang gear reducer be extended
Time：2018-06-29 | Source：恒宇国强 | Browse：1030635
After the reducer is selected, add lubricating oil (gear oil or oil) and install it on the workbench. Use height gauge to measure and adjust the center height of each test instrument and reducer. After they are at the same center height, they are fixed with bolts and washers, and small loads are added to run in and run in trial operation. After a period of operation, pour the lubricating oil out and check whether there is metal powder in the oil, and then clean it again, add lubricating oil to run in again, until no metal powder is found. Finally, the lubricating oil seal was added again and the load was increased to carry out the test.
The first use of gear reducer, advanced running is essential. Many users often ignore this preliminary work, which leads to the poor operation of the reducer or damage of the reducer, thus increasing the cost input. Therefore, the trial operation of gear reducer is helpful to reduce the cost of the user, and thus greatly improve the service life and quality of the reducer.
Pre：NO
Next：NO
<< Return >>
