Issue 37: Hengyu Guoqiang reducer - what details should we pay attention to when
Time：2018-07-21 | Source： | Browse：1600456
1. Do not use gravity hammer to hit the shell of worm gear reducer to avoid damage;
2. Regularly check whether the installation foundation, seal and transmission shaft of worm gear reducer are normal;
3. When the worm gear reducer is in normal use, the maximum temperature of lubricating oil should be less than 85 ° C. In case of abnormal oil temperature rise and abnormal noise, shut down the machine immediately for inspection. After excluding other faults, the machine can continue to use;
4. The replacement of new spare parts of worm gear reducer must go through running in and load test before formal use.
Worm gear reducer reduces the inertia of the load in use, and the reduction of inertia is the square of the reduction ratio. The speed of worm gear reducer is reduced and the output torque is increased at the same time. The torque output ratio is based on the motor output multiplied by the reduction ratio, but the rated torque of worm gear reducer should not be exceeded.
Pre：NO
Next：NO
<< Return >>
