Issue 38: Hengyu Guoqiang reducer - how to solve the problem of pitting corrosio
Time：2018-07-21 | Source： | Browse：1830455
1、 Influence of material and treatment specification
The correct selection of gear material, the matching of service load, and the selection and matching of heat treatment hardness are also the factors that affect the early pitting corrosion.
2、 Influence of lubricating oil
The unreasonable lubrication of gear transmission and the unsuitable selection of lubricant are also the causes of early pitting. The ways to prevent the early pitting of reducer gear are as follows
（1） Reasonable lubrication of gear reducer transmission and selection of suitable lubricant.
（2） Improve the installation accuracy of reducer gear and ensure the contact accuracy of gear.
For the central drive reducer, if it is not well investigated during assembly and installation, there may be unsynchronization of the left and right transmission, and the load sharing effect is poor. In this case, one side of the transmission gear may not bear the load, while the other side of the transmission gear is overloaded (up to 2 times of the design load), which is easy to cause progressive early pitting on the tooth surface. Want to know more, welcome to Hengyu Guoqiang reducer consultation.
Pre：NO
Next：NO
<< Return >>
