Issue 45: Hengyu Guoqiang reducer - how to install shaft mounted reducer
Time：2018-07-28 | Source：恒宇国强 | Browse：1600566
1、Installation relationship between shaft mounted reduction motor and working machine
In order to avoid the deflection of the main shaft of the working machine and the additional force on the bearing of the reducer, the distance between the reducer and the working machine should be as small as possible without affecting the normal operation, and its value is 5-10mm.
2、Connection between shaft mounted reduction motor and working machine
The reducer is directly installed on the main shaft of the working machine. When the reducer is running, the counter torque acting on the reducer case is balanced by the counter torque bracket installed on the reducer case or other methods. The other end is connected with the fixed bracket.
3、Installation of counter torque support
The counter torque bracket should be installed on the side of the working machine facing the reducer to reduce the bending moment attached to the shaft of the working machine. Rubber and other elastomers are used in the shaft sleeve at the connection end of the counter torque bracket and the fixed support to prevent deflection and absorb the torque fluctuation.
Through the above description of the installation of shaft mounted reduction motor, we should have an understanding of the shaft mounted reduction motor. If you need or want to know more, please consult our customer service staff.
Pre：NO
Next：NO
<< Return >>
