1.RV worm reducer worm speed should not exceed 1500r/min.
2.the working environment temperature is -40 DEG C -+40 C, when the working environment temperature is lower than 0 DEG C, before starting the lubricating oil must be heated to more than 0 degrees Celsius, when the working environment temperature is higher than 40 degrees Celsius, must take cooling measures.
3.worm gear reducer shaft can be positive and negative rotation. Convenient use;
4.and NMRV worm gear reducer motor must be suitable for working in low temperature environment;
5.the power of the motor must meet the requirements of low temperature starting torque;
6.ready to put on before use, the lubricating oil viscosity is high, should let the machine load test run after loading, to avoid equipment failure;
7.the first time using NMRV worm reducer, replace the lubricating oil in the operation after 150-400 hours after the oil change period of worm reducer is less than or equal to 4000 hours. 2 regularly check the weight and quality of oil, keep enough oil, and timely replacement of mixed with impurities or deterioration of oil.